Nissan compatible 2-button remote key transmitter for Primera, Pathfinder, and Terrano

Nissan compatible adaptable transmitter remote control

2 buttons

Frequency: 433 MHz

Key blade supplied, reference NIS11 NSN11

Condition: new

Note: Sold without a transponder for starting; if you have a faulty remote control, swap the key blades.

The chip is located in the inner compartment of the key blade.

Compatible vehicle match:

Almera (N16E) (01/2000 - 07/2003)

Almera Tino (V10E) (05/2000 - 07/2003)

Primera (P11) (04/2000 and later)

Primera (P12) (12/2001 - 08/2003)

Terrano (R20) (07/2000 - 12/2003)

Micra (K11) (02/1999 and later)

Navara D22 (11/2001 - 01/2008)

Patrol (Y61) (10/2002 - 08/2004)

Compatible equivalent references:

28268-AV600 - 28268-9F972 - 28268AV600 - 282689F972 - 282688H700

Programming procedure for remote centralization:

Ensure all doors are closed before the synchronization procedure

1. Turn the ignition switch from position 0 to ON 6 times in less than 10 seconds.
2. Then turn the ignition switch to the OFF position. Leave the key in the ignition switch.
3. After 2 seconds, the system enters programming mode and will flash the lights twice.
4. Press and hold the remote control unlock button.
5. While pressing the unlock button, press the lock button 3 times.
6. Release the unlock button.
7. The hazard lights flash once to indicate that programming is successful.
8. Repeat the procedure from step 4 to 7 for a maximum of 4 remote controls.
9. When you have finished, turn off the ignition (ON), and switch off the hazard lights.
will flash twice.
10. Remove the key and check all remote controls.